Solder Wire Waterproof Power Connector With Male And Female Plug
For Led
Quick Detail Of Waterproof Circular Connectors
1) Advanced structure: Self-locking
2) Mutiple pin:2,3,4,5,6,7,8,9 to 22 pins are optional
3) Contact pin: Screw terminal and soldering terminal available
4) Assembly: wire to wire type(no cable),wire to wire by
overmolding, wire to board
5) Colours:Black,blue,white and yellow color supported
6) Cable length:Different cable length could be customized
Main Features :
1. Safe use in the field, thanks to a high degree of
protection,high tensile strength, abrasion and notch resistance
2. Flexible: connectors for on-site assembly,extremely high winding
and unwinding strength
3. Soldering connection: proven connection technology for a large
selection of different conductors
4. M8 extension cable or Flying leads(open cable ends),with good
oil resistance/ chemical resistance
5. High temperature 260 degree ,solder reflowing
6.90 degree angled or straight(180 degree) overmolded M8 connector
with PUR or PVC cable
7. Cable jacket with different
colors,grey,black,orange,yellow,blue,overmolded color can be
customized.
M19 3 pin push waterproof connector is easy to assemble when you
install your lights fixtures or power fixtures, you could fast plug
and unplug it , save your time and cost, it could be used for a
long time , 5 years at least.
Technical specification :
| Specifications: |
| Connecting mode: | Push locking waterproof connector |
| Core number: | 3 pin ,4 pin |
| Connector type : | Bulkhead plug connector |
| Connector color: | Black, blue, yellow |
| Waterproof level: | IP67 |
| Cable specification: | 20AWG-12AWG |
| Cable diameter range: | 4.5mm-11mm |
| Contact diameter*No. | Φ1.0-Φ2.4 |
| Rated current (A): | 20A |
| Operating voltage (AC.V.rms): | 500V |
| Withstand voltage (AC.V)1min: | 1500V |
| Main characteristics: |
| Sealed against dust and fluid (IP67) |
| Vibration resistance, impact resistance, stretching resistance |
| Dust cover available |
How to use push locking waterproof connector ?
Just need to rotate it as the arrow show in right direction and
pull it, then it could be easily unplug and assemble, for wire
connection, there are two types--screw terminal and solder type,
both supported as your prefer.
This connector could be easy connection, convenient install, DIY
tools, and no need to pinch-off cable electrical plastic sets, just
unscrew the ends of waterproof connector, connect the wire
correctly: N for Neutral wire, G for Ground wire, L for live wire.
